Soil Sampling and Testing Services
The Noble Research Institute believes in the value of testing to improve effective nutrient use and efficiency. Testing offers information that can lead to more informed decision-making and greater productivity and profitability. As Noble Research Institute consultants like to say, “Unless you test, it's just a guess.”
Plants require nutrients and an acceptable soil pH to grow well. Soil testing is the best way to find out how much lime and fertilizer to apply based on the crop and existing field conditions.
The Noble Research Institute agricultural services and research operations receives and prepares samples for laboratory testing.
For more information on testing services, please call 580-224-6500.
Reasons for Soil Testing
Soil testing measures the soil's nutrient-holding capacity and provides a basis for sound land management decisions. Without soil testing, managing crop nutrients is difficult due to the complex nature of their interactions with the soil.
Types of Soil Tests
Routine soil samples are analyzed for soil pH, lime requirement, nitrate nitrogen, phosphorus, potassium, calcium, magnesium, sodium, soluble salts, organic matter and calculated CEC. Other analyses are available on request.
A Strategy for Collecting Samples
Improperly collected soil samples are the weak link in the soil testing process. For test results to be useful, the sample must accurately reflect the variability and conditions in the field. A sample from a single spot cannot achieve this.
Before sampling, make a detailed map of your land. For small areas, simply draw a diagram. For large tracts, aerial photographs may be helpful.
Divide the map into individual sample areas of 40 acres or less. Assign a short, permanent sample identification name to each area that will help you remember its location.
Each sample area should consist of only one general soil type or condition. If a field varies in slope, color, drainage or texture, and if those areas can be fertilized separately, submit a separate sample for each area (Fig. 1).
If the field being sampled has been divided into sections for various crops, submit a sample for each section – even if you now plan to grow the same crop across the entire field. Areas where liming or fertilizing patterns have differed from the rest of the field should also be sampled separately. Sample problem areas separately.
When to Collect Samples
Collect and submit samples any time you can. Try to sample at the same time of year each time you sample, though, since analyses can vary depending on when samples are taken.
In most cases, it is not necessary to take soil samples every year. Usually, once every two or three years is adequate. If you are interested in carryover nitrogen analysis, this should be done annually since these levels are dynamic.
How to Collect Routine Samples
Essential tools for collecting soil samples include a plastic bucket and a shovel or a soil probe. Do not use brass, bronze or galvanized tools because they can contaminate samples with metals.
Clean the bucket and tools before collecting samples to prevent small amounts of lime and fertilizer residue from contaminating the sample and distorting test results.
Collect samples from a depth of 0 to 6 inches. If you want to collect subsoil samples as well (useful for carryover nitrogen analysis), collect an additional sample from 6 to 12 inches.
Collect soil cores with a probe at 15 to 20 random locations across a field (Fig. 1). Zigzag patterns help ensure that samples accurately reflect overall field conditions and variability. Although a soil probe is ideal, cores can be collected with a shovel as follows: remove soil forming a small hole, cut a 1-inch thick cross-section of soil from the wall of the hole to the proper sample depth, and carefully place the soil in the bucket. For additional information on collecting a soil sample, view the How to Take a Soil Sample video.
To ensure a representative sample, avoid taking cores from small areas where soil conditions differ substantially from those in the rest of the field – for example, wet spots, severely eroded areas, old building sites, fence rows, spoil banks, burn-row areas, and old woodpile or fire sites. Cores from these spots can adversely influence soil test results and recommendations.
Mail samples and information sheet to:
Ag TestingNoble Research Institute
2510 Sam Noble Pkwy
Ardmore, OK 73401
For each sample, collect and thoroughly mix at least 15 cores in a clean plastic bucket. From this mixture, send in about 1 pint for analysis per test. Provide all information requested on the Soil Sample Entry Form. Bags and forms are available on request.
Packaging and Mailing Information
Use ink when filling out the information sheet(s) and labeling soil sample bag(s). Use the appropriate sample ID from your field map. Sample bags are easier to label before they are filled.
Complete all appropriate blanks on the information sheet(s) and write legibly. Be consistent from year to year in how you list your name, farm name and/or address. List the crops you intend to grow. Also, check to make sure that the sample ID on the form corresponds to the one on the soil sample bag and on the farm map. Testing takes about seven to 10 working days to complete from the time we receive your shipment.
Place information sheets inside the shipping container with the samples and keep a copy for your records. It is a good idea to place information sheets inside a sealed plastic bag to keep them clean and legible.
Do not send cash or check. When you receive your test results, you will receive an invoice from our contract laboratory for testing analysis.